We supply plasma cut parts cost-efficiently. One of the main advantages of plasma cutting is the high cutting speed. To minimize the thermal effects all of our cutting tables have adjustable water levels. This is especially important when cutting wear resistant steels. In addition, our combined machine cuts quickly with plasma and accurately with water.

Plasma cutting is suitable for all steel plate qualities. Technology uses accelerated jet of hot plasma. This plasma torch can cut all electrically conductive materials. Plasma cutting is suitable especially for stainless and fire-resistant steels. It is more commonly used also for cutting alloyed and low-alloyed steel qualities. Depending on the machine even up to 100 mm thick steel plates can be plasma cut. The technology also enables bevels and markings.

Plasma cutting is based on melting the material with an electrical plasma gas arc. Most commonly used gases are argon, varigon, nitrogen, oxygen and their mixtures. The high velocity gas flow blows the hot molten metal away.

The plasma kerf is always conical. E.g. the bottom of a hole is 1-3 mm smaller than the top, but the outside dimensions of the part are 1-3 mm larger at the bottom than on the top. Sufficient machining allowances need to be to be taken into the consideration when cutting over 60 mm thick steel plates. A bit of the conicity can be fixed with the rotating cutting head but however the kerf will not be straight.

Machinery

MicroStep Aquacut 20001 plasma and water beveller

• Plate thickness for carbon and stainless steels up to 80 mm with plasma and up to 100mm with water
• Cutting area 3000 x 12 000 mm
• Rotating cutting head: cutting angle 0-50 ° for shaped bevels
• Up to 80 mm deep bevels for thick flame cut profiles from scanner function
• The water/plasma machine has the advantages of the excellent dimensional stability without the thermal effects (water jet cutting) and high cutting speed together with cost-effectiveness (plasma cutting)

Bevel Plasma Messer Omnimat L5000 260A

• Plate thickness 3-30 mm in carbon and stainless steels
• Cutting area 3000 x 18 000 mm
• Rotating cutting head: cutting angle 0-52 ° for shaped bevels
• Plasma and ink-jet markings

Argon plasma

• Plate thickness 20-100 mm for stainless steels
• Cutting area 4200 x 18 000 mm

The excellent combination of our modern machinery and the production management system tailored to our need enables reliable, cost-efficient and high-quality services.

Reprocessing and finishing services include beveling, machining, bending and shot blasting. In addition, we are able to offer heat treatment as well as material testing and classification through our sub suppliers.

We work according to the quality and environmental certificates ISO 9001 and ISO 14001. FI-certificate entitles us to prefabricate structural steel components according to EN1090-2 EXC1-3. Our components can be used in steel structures requiring CE-marking.